2–24
DECbridge 500/600 Problem Solving
c. The power level of the transmit signal will be displayed on the meter.
Record the value in Table 2–2.
d. Disconnect the receive cable from the bridge and from the meter.
Figure 2–7:
Measuring the FI Transmit Power (Multimode)
LKG–5062–90
I
Tester
(receive)
cable
Transmit signal
(from bridge)
On/Off
Wavelength
select
5. To measure the power of the fiber optic signal received by the bridge, refer to
Figure 2–8 and follow these steps:
a. Move the power meter close to the FDDI cable that normally plugs into
the FI port of the bridge.
