AT commands
Digi TransPort User Guide
116
AT commands
Digi TransPort supports AT commands and Special registers (S registers). Information and
command descriptions in this section includes:
•
The AT command interface
on page 117
•
AT commands are case-insensitive
on page 117
•
Entering multiple commands
on page 117
•
Escape sequences
on page 118
•
AT command result codes
on page 118
•
S registers
on page 119
•
D command: Dial a call
on page 119
•
H command: Hang-up
on page 119
•
Z command: Reset
on page 120
•
&C command: DCD control
on page 120
•
&F command: Load factory settings
on page 120
•
&R command: CTS control
on page 120
•
&V command: View profiles
on page 121
•
&W command: Write SREGS.DAT file
on page 121
•
&Y command: Set default profile
on page 121
•
&Z command: Store phone number
on page 122
•
\AT command: Ignore invalid AT commands
on page 123
•
\LS command: Lock speed
on page 123
•
\PORT command: Set the active port for text commands
on page 124
•
\smib commands
on page 125
•
S register definitions
on page 132
