Establish a remote connection
Digi TransPort User Guide
115
6. Set the IP gateway address the DHCP clients should use (normally this router’s LAN IP
address):
dhcp 0 gateway x.x.x.x
7. Set the subnet mask DHCP clients should use:
dhcp 0 mask x.x.x.x
8. Set the DNS server DHCP clients should use:
dhcp 0 dns
Establish a remote connection
Once you have finished configuring the router, there are several ways of establishing a link to a
remote system:
• Use the
ATD
command to make an outgoing V.120 call.
• Initiate a DUN session to establish a dial-up PPP connection.
• Make an outgoing X.25 call using the
ATD
command followed by the X.28
CALL
command.
• Make an outgoing TPAD (Transaction PAD) call using the TPAD
a
(address) command followed
by the appropriate NUA. This is normally only carried out under software control.
Similarly, incoming calls are handled according to the protocols that have been bound to the ASY
ports, and whether answering is enabled for each protocol.
