Digi TransPort User Manual Download Page 598

Page: 598 / 813

Event Settings parameters

Digi TransPort User Guide

598

Local Logging parameters

A secondary log file can be created on a USB flash drive. Events will be appended to this log file.

Using a secondary log file is useful if an extended logging period is required where, the normal

eventlog.txt

file would overwrite early events before the operator has had a chance to view

them. The secondary log file can be limited in size or allowed to fill the USB flash drive. Once the

log file is full, earlier events are pruned from the end of the file to allow new events to be added.

To configure the local logging parameters, set the following values in the web interface:

Local Drive to log to

Determines the drive letter where the USB flash drive is located. This is designated

for a USB

drive.

Log filename

The name of the file for the secondary event log.

Log size

The maximum size of the log file in kilobytes.

XML logs

On platforms that support it, event logs can be saved in XML format. This field specifies the

size of the XML log file, in kilobytes. The files created will be named

EVXML1.XML

EVXML2.XML

, etc.

Related CLI commands

Entity

Instance

Parameter

Values

Equivalent Web Parameter

event

logdrive

Drive letter, such as

for

USB flash drive.

Local drive to log to

event

logfile

Name of the file, such as

mylog.txt

Log filename

event

logsizek

Size of log in kilobytes,

such as

1048576

, which

is 1MB.

Log size

event

xmllogs

None

Summary of Contents for TransPort














































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TransPort

Reviews:

Related manuals for TransPort

Brands by name

Popular brands

Digi TransPort, User Manual

Search results

Summary of Contents for TransPort

Reviews:

Related manuals for TransPort

Brands by name

Popular brands