OpenVPN parameters
Digi TransPort User Guide
449
NAT mode
Selects whether IP Network Address Translation (NAT) or Network Address and Port
Translation (NAPT) are used at the Ethernet interface. When the parameter is set to disabled,
no NAT will take place.
IP analysis
When enabled, the un-encapsulated IP traffic will be captured into the analyser trace.
Firewall
The Firewall parameter is used to turn Firewall script processing
On
or
Off
for this interface.
IGMP
This IGMP parameter is used to enable or disable the transmission and reception of IGMP
packets on this interface. IGMP is used to advertise members of multicast groups. If IGMP is
enabled, and a member of a multicast group is discovered on this interface, multicast packets
for this group received on other interfaces will be sent out this interface.
Include in RIP advertisements
When enabled, the router includes this static route in RIP advertisements.
Automatically connect interface
If enabled, this OpenVPN instance will be considered as an Always On interface.
Server mode (listener)
Configures the OpenVPN instance to listen for inbound OpenVPN sockets.
Link socket port
The default port used by OpenVPN is
1194
. If a different or non-standard port number is used,
specify it here.
Link socket protocol
OpenVPN can use TCP or UDP as the transport protocol. Select the required protocol here.
TLS auth password / Confirm TLS auth password
Allows the OpenVPN instance to use an extra level of security by having a TLS password
configured.
