B/21
- ATTENTION -
DAMAGE MAY BE CAUSED BY ENTANGLEMENT IN
MOVING PARTS. PREVENT ACCIDENTS WHILE YOU
ARE WORKING BY ENSURING THAT, HANDS, FEET,
CLOTHING, JEWELLERY AND HAIR CANNOT GET
CAUGHT IN MOVING PARTS.
- DANGER -
EXHAUST GASES FROM THE ENGINE ARE TOXIC AND
CAN CAUSE DAMAGE TO YOUR HEALTH.
- DANGER -
THE VEHICLE MUST BE OUTDOORS WHEN
THE ENGINE IS RUNNING.
THE VEHICLE CAN BE KEPT IN A CLOSED AREA ONLY
IF IT IS PROPERLY VENTILATED AND THE VEHICLE
IS EQUIPPED WITH SPECIAL PURIFIERS.
- ATTENTION -
IF YOU NEED TO WORK UNDER THE RAISED MOBILE
PARTS (BOOMS, SHOVELS, ETC.) OF THE VEHICLE,
BLOCK THEM USING SPACERS PLACED ON THE
CYLINDER RODS OR LEAN THEM UP AGAINST APPRO-
PRIATELY SIZED SUPPORTS.
- Never carry out maintenance on a moving vehicle.
If maintenance needs carrying out with the engine run-
ning,
it must be carried out only by personnel autho-
rised by the Dealer or directly by the Manufacturer,
DIECI s.r.l.
Request assistance of at least two workers and follow the
instructions below:
One worker must always be seated in the driver's seat,
ready to switch off the engine at any time.
All workers must remain in contact with one another.
Take care not to remain entrapped in components during
the execution of operations performed on the fan, belt or
other rotating parts.
Do not touch levers or control pedals. Should a lever or
pedal need to be moved, always warn operators first so
they can move out of harm’s way.
Do allow instruments or other objects to fall into the ve-
hicle’s rotating parts, as these parts may break and be
projected out causing danger.
- If you need to perform repair or maintenance work under
the vehicle, firmly support the equipment being used and
the vehicle with blocks that are solid enough to support
the weight.
- Store attachments removed from the vehicle in a safe
place where they do not risk falling. Take precautions to
prevent unauthorized persons from approaching the sto-
rage area.
- Do not rest metal parts on the battery.
- Disconnect the battery wires before working on the elec-
trical system or before carrying out arc welding on the
vehicle.
- Welding operations must always be carried out by quali-
fied welders and in areas equipped with suitable equip
-
ment. There is danger of gas leaks, fire or electrocution
during welding operations; Do not allow unqualified per
-
sonnel to carry out such operations.
- When carrying out electric welding, connect the earth of
the welding machine as close as possible to the area to
be welded, and prevent the electric current from passing
through ball bearings, articulated joints, hydraulic cylin-
ders or sliding parts. If welding must be done in proximi-
ty to the oil or fuel tank, empty the tanks before welding.
Summary of Contents for Agri Farmer
