Dieci Agri Farmer, Operation Manual

Page: 100 / 272

C/26
Getting to Know and Using the Vehicle
Mod. Agri Farmer
- ATTENTION
:
- Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
pEDALS
Accelerator pedal
(fig.35/C Pos.”1”)
Press down the accelerator pedal to increase engine RPMs
and release it to decrease RPMs. The pedal operates direct-
ly on the engine injection pump.
The maximum speed of the vehicle varies on inflation pres -
sure variation, the measurement and wear of the tyres.
Service brake pedal
(fig.35/C Pos.”2”)
Press the service pedal to slow down or stop the vehicle.
The pedal operates directly on the service brakes inside the
differential axles. When the brake pedal is pushed, the rear
stop lights switch on. The lights remain switched on until the
pedal is released.
periodically check that both lights are working.
- attEntion
In the event of limited use of the pedal, periodically check
that it is working properly. Contact a diEci SERVICE CEN-
TRE IN THE EVENT OF A PROBLEM.
“INCHING” pEDAL
(fig.35/C Pos.”3”)
The pedal allows for slow, precise movements forward even
when the engine is running at a high RPM. It acts directly on
the hydrostatic transmission.
The vehicle stops, remaining partially braked, when the pe-
dal is fully pressed down.
- attEntion
Do not press the “inching” pedal at high speeds, the ve-
hicle will brake sharply and the Diesel engine could go
into overrevving.
3
2
1
(fig.35/C)