Dieci Agri Farmer Operation Manual Download

Page: 169 / 272

D/5

ATTENTION

- Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.

DEClARATION Of fIRST INSpECTION by

MANufACTuRER

diEci s.r.l.

declares that every vehicle produced in its facto-

ries undergoes static and dynamic inspections before being

placed on the market in order to verify proper operation and

compliance with all relative European directives. After inspec-

tions are performed, a CE certificate is issued that corre-

sponds to the vehicle inspected and its supplied attachments.

Every CE-marked

diEci

product is supplied with its own

certificate, which must be kept by the vehicle’s legitimate

owner in accordance with the law.

DEClARATION Of fIRST INSpECTION by MANufACTuRER

Summary of Contents for Agri Farmer

















































































































































































































































































Search results

Summary of Contents for Agri Farmer

Reviews:

Related manuals for Agri Farmer

Brands by name

Popular brands

Dieci Agri Farmer, Operation Manual

Search results

Summary of Contents for Agri Farmer

Reviews:

Related manuals for Agri Farmer

Brands by name

Popular brands