B/13
- To prevent damaging hydraulic connections when chan-
ging an attachment, stop the engine and wait a minute
to remove pressure from the circuit. Always clean con-
nectors before their reinsertion.
- Check the cleanliness, protection and the conditions of
rapid detachment connections in attachment circuits daily.
- ATTENTION -
Operators who note that the vehicle is not operating pro-
perly or that is does not conform to safety regulations
must immediately inform the construction site manager.
- PROHIBITION -
IT IS FORBIDDEN for operators to directly carry out
repair or adjustment work unless trained to do so. Only
the person charged to do so should carry out mainte-
nance work on the vehicle.
- PROHIBITION -
IT IS STRICTLY FORBIDDEN to attempt starting the vehi-
cle by pushing or pulling on it. This may cause serious
damage to people and/or the vehicle.
- If operating the vehicle at low temperatures (-10°C),
empty and refill the tank using lubricants, fuel or cooling
liquids suitable for such temperatures.
- ATTENTION -
The use of the vehicle in protected environments such
as refineries or explosive atmospheres is STRICTLY
PROHIBITED. Special optional equipment is available
for use in these types of locations. Contact your agent
or dealer.
- Ensure that service brakes and horn are working properly.
- Slow down before turning.
- Maintain control of the vehicle and its speed in all situations.
- Do not drive in reverse for long distances.
- Brake slowly, avoid abrupt braking.
- Hydraulic steering is very sensitive to steering wheel mo-
vements. Steer slowly and avoid any sudden movements.
- The speed of vehicles with loads must never exceed 10
Km/h. Should the load exceed 50% of the maximum admit-
ted load, the machine speed must be reduced to 5Km/h.
- PROHIBITION -
Carrying people on or lifting people up with the vehicle
is STRICTLY PROHIBITED unless the vehicle is equip-
ped for said purpose and has a special certificate of
conformity regarding the transport of people.
- Carefully follow loading programme instructions.
- ATTENTION -
Before each use, check that attachments have been proper-
ly mounted and secured on their corresponding supports.
- ATTENTION -
Prior to each use, check that the cab safety system has
been set in compliance with the mounted attachment.
- Instructions supplied by the anti-tipping system must be
considered valid for vehicles in standard working condi-
tions, on flat, even ground and with properly functioning
and correctly calibrated instruments. Regardless, limit va-
lues displayed on the load tables must never be exceeded.
- Never bring equipment near open flames.
Summary of Contents for Agri Farmer
