B/16
Mod. Agri Farmer
Safety Regulations
ROAD TRAVEL (INSTRUCTIONS)
- Use the levelling control switch to level the vehicle‘s
chassis in relation to the axes of the wheels (if present).
- Ensure that all outriggers have been perfectly retracted
and raised (if present).
- Close the telescopic arm (boom) completely.
Lower the main boom completely and raise it slightly
(300 mm from ground).
- Make sure the lights are functioning properly before
driving the vehicle on roads. Check that the ‘slow vehi-
cle’ revolving indicator light is installed and operational.
Keep it activated during both day and night use.
- Carry out the wheel timing. Setting steering as shown in
the vehicle handbook and to blocking the selection lever
using the relevant device IS COMPULSORY. In Italy set
the 4 wheel steering mode; on public roads do not use
crosswise steering or 2 wheel steering.
- Ensure that the fuel quantity is sufficient.
- Mount all attachments provided for road driving in com-
pliance with the country where operating.
- Install a overhanging load signal panel on the boom
head before the entering onto the road.
- Always evaluate the itinerary to be covered, taking into
consideration suspended structures (e.g. bridges, under-
passes) that could be damaged by the vehicle.
- In some countries it is mandatory to place wedges under
the tyres when the vehicle is stopped.
- Make sure that the vehicle complies with local regula-
tions regarding number plates when travelling on roads
during both day and night.
- ATTENTION -
ROAD TRANSFER WITH ATTACHMENTS SECURED ON
THE FORK HOLDING PLATE OTHER THAN THOSE PER-
MITTED BY THE LAW IN THE COUNTRY WHERE THE
VEHICLE IS USED IS PROHIBITED.
- ATTENTION -
OPERATING THE VEHICLE ON THE ROAD WHEN IT IS
CARRYING A LOAD IS PROHIBITED.
ROAD TRAVEL
- ATTENTION -
BEFORE THE VEHICLE IS TRANSFERRED TO THE
ROAD MAKE SURE YOU ARE ACTING IN COMPLIANCE
WITH THE RULES AND REGULATIONS PERTINENT IN
THE COUNTRY OF USE.
THE OBLIGATIONS FOR ROAD TRAVEL ARE GIVEN IN
THE VEHICLE REGISTRATION DOCUMENT.
- Dimmed headlights should be used during day hours
and on roads where use of visual signals and lighting
devices is not mandatory.
- Ensure correct operation and cleaning of headlights, di-
rectional lights and windscreen wipers.
- ATTENTION -
ENSURE CORRECT POSITIONING OF
REAR VIEW MIRRORS.
PAY ATTENTION AS THE PERCEPTION OF OBJECTS'
POSITIONS THROUGH THE REAR VIEW MIRRORS MAY
NOT BE EXACTLY AS THEY ARE; THEY MAY SEEM FUR-
THER AWAY OR NEARER THAN THEY ARE IN REALITY.
Summary of Contents for Agri Farmer
