Dieci Agri Farmer, Operation Manual

Page: 158 / 272

getting to Know and Using
the vehicle integrated devices
C/84
Mod. Agri Farmer
- ATTENTION
:
- Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
Press and hold button “1”(fig.204/C) for 2 seconds, during normal functioning of the instrument, to carry out the anti-tipping system test.
The test consists in:
1. Indicator in start position 1st Green sector.
2. Indicator in end position 2nd Red sector.
3. Indicator in start position 1st Green sector.
4. Indicator in current work position.
The angular speed of the index during the test is 240 angular degrees in 2 sec. (120 degrees/sec).
ANTI-TIppING SYSTEm mUTE
Press button “1” (fig.204/C) to suspend the acoustic signal due to an alarm of the anti-tipping system.
In the alarm zone (start of 1st Red sector start of 2nd Red sector) the acoustic signal must always be activated even if key “1”
has been previously pressed (fig.204/C).
Example:
1. The indicator enters the 1st Red zone.
2. The buzzer starts to ring intermittently.
3. Pressing the last key suspends the acoustic signal.
4. The indicator continues to rise and enters the 2nd Red zone.
5. The buzzer starts to ring continuously. Pressing the left key does not suspends the acoustic signal.
GENERAL ALARm LED
The emergency indicator light/general alarm occur:
- in the event of engine error
- if one of the indicator lights indicated in the table below should switch on
- in the event of engine overrevving
Engine error
The engine has an electronic control unit that communicates directly with the central dashboard. The anomalies are signalled by the gen-
eral alarm indicator light accompanied by the acoustic signal with duration of 1.5 seconds and the display of the error code on the LCD.
(fig.204/C)
ANTI-TIppING SYSTEm TEST
1
2