Dieci Agri Farmer, Operation Manual

Page: 161 / 272

C/87
- ATTENTION
:
- Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
ANTI-TIppING ERRORS
The errors of the anti-tipping device are displayed in place of the clock. The displayed message will be of “Er : nn” type where
“Er” means “error” and “nn” indicates the identification number (e.g. “ER:64”.
main panel errors
Alarm code Description
90 Hour meter message error (10FF80E3)
91 Hour meter message error (10FF80E3)
92 Hour meter message error (10FF80E3)
93 Hour meter message error (10FF80E3)
94 SARL response error, different response value
95 Calibration pin no longer connected during calibration
96 Errors inside panel
97 Errors inside panel
98 Errors inside panel
99 Errors inside panel
Alarm codes/system errors
Alarm
code
Description What to do
11 CRC error of the memory area containing the software Contact the after-sales technical assistance
12 CRC error of the memory area containing the parameters Contact the after-sales technical assistance
13 Program flow control error Contact the after-sales technical assistance
14 Data exchange error between the two microcontrols Contact the after-sales technical assistance
15 Over range power supply voltage error +7Vdc, +18Vdc
Check battery voltage with machine off and on is
within the indicated field.
16
Internal power supply voltage error of first over range chan -
nel +7Vdc, +18Vdc
Contact the after-sales technical assistance
17
Internal power supply voltage error of second over range
c7Vdc, +18Vdc
Contact the after-sales technical assistance
21 Congruency error of the Cut Off1 output status Contact the after-sales technical assistance
22 Congruency error of the Cut Off2 output status Contact the after-sales technical assistance
23 Congruency error of the WDO1 output status Contact the after-sales technical assistance
24 Congruency error of the output 1 status Contact the after-sales technical assistance
25 Congruency error of the output 2 status Contact the after-sales technical assistance
26 Congruency error of the WDO2 output status Contact the after-sales technical assistance
31
Load cell A:
CRC error of the parameters inside load sensor.
Contact the after-sales technical assistance
32
Load cell A:
Over range signal reading error (10-990)
Contact the after-sales technical assistance
33
Load cell A:
Over range internal offset reading error (466-526)
Contact the after-sales technical assistance
34
Load cell A:
Internal 5Vdc power supply voltage error
Contact the after-sales technical assistance