B/17
HOISTING THE MACHINE
- Disassemble any attachments from the machine.
- Completely retract and lower the boom.
- When the machine is in position, engage the parking
brake and position the gear selector in neutral "N".
- Close the windows and lock the door of the cab.
- Ensure that the hoisting mechanism has a suitable ca-
pacity for the weight of the machine before attempting to
hoist it. The weight of the machine is displayed on a plate.
- Always ensure the devices used to anchor the machine
(cables, chains, wedges, etc.) are in good condition; en-
sure they are not worn, broken or twisted.
- Check the capacity of the anchors before hoisting the
machine.
- Check the overall dimensions of the machine.
- Use the hoisting points illustrated in the figure and mar
-
ked on the machine with the appropriate symbols.
- Before hoisting the machine, ensure there are no unau-
thorised people in the surrounding area.
- Bear in mind the location of the centre of gravity of the
telehandler.
- Slowly hoist the machine with the utmost care.
TRANSPORTING THE MACHINE
- Before transporting the machine, ensure that the rules
and regulations of every area the machine will travel
through are complied with.
- Disassemble any attachments from the machine.
- Completely retract and lower the boom.
- Before loading the machine onto the means of transport,
ensure there is no grease, ice or other slippery substan-
ces on the machine or the ramp.
- Ensure the brake is engaged on the tractor and the trailer.
- Ensure the safety instructions regarding the transport
platform have been applied correctly before loading the
machine and that the driver of the means of transport is
informed about the overall dimensions and weight of the
telescopic handler.
- Load and unload the machine on solid and level ground.
- Check the overall dimensions for the maximum and mi-
nimum heights above ground and the permitted weight.
Check the authorised soil contact pressure for the
platform compared to the machine.
- Load the machine on the means of transport (ensure the
ramps are correctly and safely positioned).
- Load the machine parallel to the platform.
- Manoeuvre the machine with caution onto the means of
transport.
- When the machine is in a safe position, engage the par-
king brake and position the gear selector in neutral "N".
- Place wedges under the front and rear of the tyres on the
machine. Anchor the machine to the means of transport
with cables or chains. Tighten the cables and/or chains.
- Close the windows and lock the door of the cab.
- Use the anchor points illustrated in the figure and mar
-
ked on the machine with the appropriate symbols.
- Always ensure the devices used to anchor the machine
(cables, chains, wedges, etc.) are in good condition and
that the capacity of the means of transport is suitable for
the weight to handle.
- ATTENTION -
Carefully comply with all the steps described above to
ensure the machine is transported safely.
Summary of Contents for Agri Farmer
