Dieci Agri Farmer Operation Manual Download

Page: 144 / 272

C/70

Getting to Know and Using the Vehicle

Mod. Agri Farmer

ATTENTION

- Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.

(fig.154/C)

7-pOLE ELECTRIC SOCKET fOR TRAILER

(OpTIONAL)

(fig.154/C Pos.”1”)

Located at the rear of the vehicle.

- attEntion

Before moving the vehicle with the trailer:

- Ensure that the brake and signalling systems are func-

tioning properly.

- Verify that the trailer conforms to regulations in force in

the country where the vehicle is being used.

Summary of Contents for Agri Farmer

















































































































































































































































































Search results

Summary of Contents for Agri Farmer

Reviews:

Related manuals for Agri Farmer

Brands by name

Popular brands

Dieci Agri Farmer, Operation Manual

Search results

Summary of Contents for Agri Farmer

Reviews:

Related manuals for Agri Farmer

Brands by name

Popular brands