Derbi GPR 125 Racing, Workshop Manual

Page: 80 / 247

3 - MAINTENANCE
80
RESETTING SERVICE INDICATOR
1- Once the machine has travelled the distance set out on the table below, the system will activate
the inspection function, which appears on the display in the form of the following icon:
2- Service intervals
3- Deactivating the service symbol:
First enter into configuration mode. To do so, enter a three figure code – in this case 423 , which will allow
changing from kilometres to miles, service resetting , as well as resetting the odometer to zero on a once
only basis and providing the machine has clocked less than 200 km.
4- To access the configuration described, the MODE button
(1) (located on the instrument panel) must be held down
for at least 10 seconds, in the interval time of 1.5 to 4
seconds maximum
after turning on the ignition. The following
should be displayed:
FIRST WARNING
WARNING INTERVAL 1000 Kms
6000 Kms
1