DENTSPLY Multimat Easy, Instructions For Use Manual

Page: 39 / 154

39
Multimat
Easy
Safety notes 2
‹
Safety notes
All DeguDent GmbH devices are designed and produced
using
state-of-the-art technology and following all
recognized safety rules.
Nevertheless, using these devices may result in
hazards
to operators or third parties or damage to the Multimat
®
Easy or other property, e.g. if:
• The unit is operated by untrained or not properly
instructed personnel
• The unit is not employed for its appropriate uses
• The unit has not been properly operated or maintained
Use only
qualified and trained personnel
to perform the
tasks described in these Instructions for Use. Observe any
applicable legal age restrictions!
Personnel to be trained or guided, including vocational
trainees, must work with the Multimat
®
Easy only if conti-
nuously supervised
by an experienced operator!
‹
Safe operation
To ensure safe operation of the unit, read and follow the
following instructions:
• Do not place the Multimat
®
Easy and the vacuum pump
(available separately) in the immediate vicinity of sources
of heat to prevent overheating of the device!
• Keep the device clear of the nearest wall or object. The
minimum distance is 25 to 30 cm !
• Place the unit only on non-flammable surfaces. Keep
flammable objects and liquids away from the unit!
• Position the vacuum pump such that adequate ventilati-
on is assured.
• Protect the unit from moisture and steam!
• Ensure that the unit is connected only to the appropriate
mains voltage (see “Technical specifications and opera-
ting environment” ).
• Do not reach into the firing chamber during operation
– burn hazard!
• The firing platform moving upward presents a crushing
hazard for hands and fingers!
• Opening the unit is prohibited. Electric shock hazard!
• If the Multimat
®
Easy is not to used for an extended
period, disconnect the unit from mains!
‹
Safe transport
The Multimat
®
Easy weighs approximately
22.7 kg
and
can be lifted and transported by a single person .
The unit is shipped in a cardboard case and is protec-
ted by an upper and a lower
interior foam shell
. These
shells are designed such that the firing chamber is also
protected
from shock by an elastic foam element. When
repackaging the unit, make sure that this protective foam
element is properly in place.