DENTSPLY Multimat Easy, Instructions For Use Manual

Page: 51 / 154

51
Multimat
Easy
Here you can determine whether the vacuum pump will
run in standby mode (see
“Entering standby mode” ).
Here you can switch between °C and °F as a temperature
unit.
Here you can turn the beep signals on or off. If the beep
signal is turned on, you get:
A
short tone each time a key is pressed; a long tone for
each invalid entry;
three tones
at the end of a program.
Indicates the operating hours for the muffle.
Indicates the operating hours for the vacuum
pump.
Indicates the total operating hours for the
Multimat
®
Easy.
Controls 5
Standby Vacuum
[on/off]
°C / °Fahrenheit
[°C/°F]
Acoustic signal
[on/off]
Hours muffle:XX:YY
Hours pump:XX:YY
Hours furnace:XX:YY