- 170 -
Settings
» Automatic Control Settings »
(Programmable) LED Settings
A.
LED Settings
window is accessed by clicking the
LED Settings
button in the
Automatic Control Settings
window.
B.
Save to Buffer
button sends the parameter changes to the DigiConnect buffer. When changes are to be
applied to CPM 310 G unit,
Save to Device
button must be utilized, which is located under the
Buffer
tab.
LED setting principles have been examined thoroughly back at the dedicated section in the
Relay Menus
Manual
. The
LED Settings
window of the DigiConnect program utilizes the same principles, however, the
organization of action differ from the CPM 310 G menus. The organization is explained below.
Programmable LED addresses (1) are given on the top of “appointed functions” list (2).
To add a function to appointed functions list, any functions are selected from the available functions list
(3), and
Add
button (4) is clicked.
To remove the appointment of a function from a certain programmable LED, the function is selected from
the related “appointed functions” list and
Remove
button (5) is hit.
To modify the displayed title of a programmable LED, a title is selected from the combo box (6) just below
the appointed functions list. Note that more than one function can be appointed to trigger a
programmable LED, so determining the displayed title of a LED must be done with care to prevent
misinterpretations.
It must be kept in mind that the LEDs hereby involved in the explanations are the programmable LEDS on the
LEDs Menu, which is accessed by pressing
Reset
button on the front face/cover of CPM 310 G once.
□
Summary of Contents for CPM 310 G
