DEMA CPM 310 G, User Manual

Page: 133 / 225

- 133 -
Program Startup
Starting Up The Program
After the setup of the DigiConnect program is completed, it can be
launched utilizing one of the methods described below. The
program can be launched;
1.
via the Start Menu by accessing: Start » Programs » Dema »
DigiConnect .
2. by double clicking the DigiConnect shortcut automatically
created by setup.
3. via command prompt or Windows Explorer at the address;
C:\Program Files (x86)\DigiConnect\digiconnect.exe
Establishing Communication with CPM 310 G via DigiConnect
1. Once the program is launched, the screen shown on the picture
Startup Dialogue 1 pops up. The menu reads as below:
For the correct operation of DigiConnect software, the number
format of your operating system must be set as “.” To proceed to the
related op tions menu of your operating system, press the “OK”
button. As the DigiConnect software uses the parameter format of
123,456,789.00, system settings must be set to allow this format as
keyboard input.

If you want to edit or check the systems settings, OK button is
clicked on this screen; the resulting screen is shown on Startup
Dialogue 2a . On this menu, check or change the system settings
as the format described before, by clicking the Customize
button and having the Decimal Symbol parameter as “.” (Point).
Once it is assured that the setting is correct, press the OK
button to save the settings and discard.

If you are sure that the system settings are correctly done,
press the
Cancel button while at Startup Dialogue 1 , to jump to
next screen, shown on picture Startup Dialogue 2b . Press the
Continue button to access to the next step. ↘
Startup Dialogue 1
Startup Dialogue 2a
Startup Dialogue 2b