05 Optional Accessories | REG2000
5-23
EMC-BPS01
External Power
Supply Card
Terminals Descriptions
24 V
GND
Input power: 24 V ± 5%
Maximum input current: 0.5 A
Note:
1) Do not connect any control circuit terminal on the Power Regenerative
Unit to this +24 V power terminal.
2) Do not connect DCM terminal on the Power Regenerative Unit to
the EMC-BPS01 input terminal GND to keep insulation effective.
Functions: When the EMC-BPS01 is the only Power Regenerative Unit
power supply, the communication works normally and the following
functions are supported:
Read/ Write parameters
Keypad display
All keys except the RUN key can be operated
Effective analog input
The following functions are not supported:
(1) Relay output (RA1, RB1, RC1); (2) hot swapping
Once you install the EMC-BPS01, set Pr.03-05 =1 to enable this external power supply card.
Multi-Input terminals (MI1– MI5) need an external power supply to function.
1. Screw fixing hole
2. Power indicator
3. Positioning hole
4. 24V-GND terminal block
5. Fool-proofing groove
6.
Motor drive connecting port
