05 Optional Accessories | REG2000
5-6
5-2 USB/RS-485 Communication Interface IFD6500, IFD6530
Caution
Read this instruction sheet thoroughly before installation and operation.
The contents of this instruction sheet and the driver file may be revised without prior notice. Consult our
distributors or download the most updated instruction/driver version at
http://www.delta.com.tw/product/em/control/cm/control_cm_main.asp
Introduction
The IFD6530 is a convenient RS-485-to-USB converter, and does not require external power-supply or
complex set up. It supports baud rates from 75–115.2 kbps and auto-switching of the direction of data
transmission. It uses RJ45 in an RS-485 connectors for convenient wiring. Its tiny dimensions, use of
plug-and-play and hot swapping make it easy to connect all DELTA IABU products to your PC.
Applicable Models: All DELTA IABU products.
Applications and Dimensions
Specifications
Power supply
No external power is needed
Power
consumption
1.5 W
Isolation
voltage
2,500 V
DC
Baud rate
75; 150; 300; 600; 1,200; 2,400; 4,800; 9,600; 19,200; 38,400; 57,600; 115,200 kbps
RS-485
connector
RJ45
USB connector
A type (plug)
Compatibility
Full compliance with USB V2.0 specification
Maximum cable
length
RS-485 Communication Port: 100 m
Supports RS-485 half-duplex transmission
