Delta CFP2000 Series, User Manual

Page: 592 / 756

Chapter 16 PLC Function Applications
│
CFP2000
16-19
Explanation of basic structure of ladder diagrams
LD (LDI) command:
An LD or LDI command is given at the start of a block.
LDP and LDF have this command structure, but there are differences in their action state. LDP, LDF
only act at the rising or falling edge of a conducting contact. (see figure below):
AND (ANI) command:
A series configuration in which a single device is connected with one device
or a block.
ANDP, ANDF also have structures like this, but their action occurs at the rising and falling edge.
OR (ORI) command:
A single device is connected with one device or a block.
ORP, ORF also have identical structures, but their action occurs at the rising and falling edge.
ANB command:
A configuration in which one block is in series with one device or block.