Delta CFP2000 Series, User Manual

Page: 232 / 756

Chapter 11 Summary of Parameter Settings

CFP2000
11-23
Pr. Parameter Name Setting Range Default
48: Analog current input loss (ACE)
49: External fault input (EF)
50: Emergency stop (EF1)
51: External base block (bb)
52: Password error (Pcod)
53: Firmware version error
54: Communication error (CE1)
55: Communication error (CE2)
56: Communication error (CE3)
57: Communication error (CE4)
58: Communication time-out (CE10)
60: Brake transistor error (bF)
61: Y-connection /
ᇞ
-connection switch error (ydc)
62: Deceleration energy backup error (dEb)
63: Slip error (oSL)
64: Electromagnet switch error (ryF)
71: Watchdog
72: Channel 1 (STO1–SCM1) safety loop error (STL1)
73: External safety gate (S1)
74: FIRE mode output
76: Safe torque off (STO)
77: Channel 2 (STO2–SCM2) safety loop error (STL2)
78: Internal loop error (STL3)
79: Uoc (U-phase output short-circuit)
80: Voc (V-phase output short-circuit)
81: Woc (W-phase output short-circuit)
82: U phase output phase loss (OPHL)
83: V phase output phase loss (OPHL)
84: W phase output phase loss (OPHL)
89: RoPd initial rotor position detection error
90: Inner PLC function is forced to stop
93: CPU error
99: CPU instruction error
（ TRAP ）
101: CANopen software disconnect 1 (CGdE)
102: CAN open software disconnect 2 (CHbE)
103: CANopen synchronous error (CSyE)
104: CANopen hardware disconnect (CbFE)
105: CANopen index setting error (CIdE)
106: CANopen slave station number setting error
(CAdE)
107: CANopen index setting exceed limit (CFrE)
111: ictE Internal communication overtime error
(InerCOM)
142: Auto-tuning error 1 (no feedback current error)
(AUE1)
143: Auto-tuning error 2 (motor phase loss error)
(AUE2)
144: Auto-tuning error 3 (no-load current I
0
measuring
error) (AUE3)