Delta Electronics VFD-M Series, User Manual

Page: 155 / 173

Appendix B Accessories |
B-10 Revision May 2008, ME14, SW V3.04
B.5 Zero Phase Reactor (RF220X00A)
Dimensions are in millimeter.
Recommended Wire
Size
Cable
type
( Note ) AWG mm
2
Nominal
(mm
2
)
Qty.
Wiring
Method
≦
10
≦
5.3
≦
5.5 1
Diagram
A
Single-
core
≦
2
≦
33.6
≦
38 4
Diagram
B
≦
12
≦
3.3
≦
3.5 1
Diagram
A
Three-
core
≦
1
≦
42.4
≦
50
4
Diagram
B
Note: 600V Insulated Unshielded Cable.
Power
Supply
Zero Phase Reactor
MOTOR
U/T1
V/T2
W/T3
R/L1
S/L2
T/L3
U/T1
V/T2
W/T3
R/L1
S/L2
T/L3 Power
Supply
Zero Phase Reactor
MOTOR
Note 1: The table above gives
approximate wire size for the zero phase
reactors but the selection is ultimately
governed by the type and diameter of
cable fitted i.e. the cable must fit through
the center hole of zero phase reactors.
Note 2: Only the phase conductors should
pass through, not the earth core or screen.
Note 3:
When long motor output cables
are used, an output zero phase reactor
may be required to reduce radiated
emissions from the cable.
Diagram B
Please put all wires through 4 cores in
series without winding.
Diagram A
Please wind each wire 4 times around the
core. The reactor must be put at inverter side
as close as possible.