Steps
1.
Align the retention latch end of the cable management arm with the bracket on the expansion enclosure .
2.
Insert the cable management arm into the bracket until you hear an audible click.
The audible click indicates that the cable management arm is secure.
Figure 71. Installing Cable Management Arms
3.
Swing the extension arm into alignment with the rail bracket.
Figure 72. Align Extension Arm with Rail Bracket
4.
Push the extension arm into the rail bracket until you hear an audible click.
The audible click indicates that the cable management arm is secure.
58
Replacing SCv360 Expansion Enclosure Components
