Part
Part Number
Description
Used to secure the expansion enclosure chassis and top cover to a rack
without threaded holes
036-034-003
Expansion enclosure chassis handle (Quantity: 4)
Used to lift the expansion enclosure chassis onto a mechanical lift and mount
it in a rack
Steps
1.
Adjust the length of the expansion enclosure rails to fit the rack.
2.
Attach the right rail to the back post of the rack.
a. Align the right rail with the lower two U spaces of the 4U mounting location.
b. With the release latch on the outer part of the rack post, place the catch mechanism over the post.
c. Push the rail back to secure the rail to the rack post.
An audible click indicates that the rail is secure in the post.
d. Make sure the post/catch mechanism is secure and attached to the rack post.
Figure 17. Attach Rail to the Back of the Rack
3.
Attach the right rail to the front post of the rack.
a. Align the right rail with the lower two U spaces of the 4U mounting location.
b. Pull the rail forward, with the alignment pins in the middle holes of the bottom two U spaces of the 4U mounting location.
An audible click indicates that the rail is secure in the post.
SCv360 Expansion Enclosure Installation
21
