Dell S4048-ON, Configuration Manual

Page: 807 / 1039

snmp-server community community-name rw
2. Copy the f10-copy-config.mib MIB from the Dell iSupport web page to the server to which you are copying the configuration
file.
3. On the server, use the
snmpset
command as shown in the following example.
snmpset -v snmp-version -c community-name -m mib_path/ f10-copy-config.mib force10system-
ip-address mib-object.index {i | a | s} object-value ...
• Every specified object must have an object value and must precede with the keyword i. Refer to the previous table.
•
index
must be unique to all previously executed
snmpset
commands. If an index value has been used previously, a
message like the following appears. In this case, increment the index value and enter the command again.
Error in packet.
Reason: notWritable (that object does not support modification)
Failed object: FTOS-COPY-CONFIG-MIB::copySrcFileType.101
• To complete the command, use as many MIB objects in the command as required by the MIB object descriptions shown in
the previous table.
NOTE: You can use the entire OID rather than the object name. Use the form:
OID.index i object-value
.
To view more information, use the following options in the
snmpset
command.
•
-c
: View the community, either public or private.
•
-m
: View the MIB files for the SNMP command.
•
-r
: Number of retries using the option
• -t : View the timeout.
•
-v
: View the SNMP version (either 1, 2, 2d, or 3).
The following examples show the
snmpset
command to copy a configuration. These examples assume that:
• the server OS is UNIX
• you are using SNMP version 2c
• the community name is public
• the file f10-copy-config.mib is in the current directory or in the snmpset tool path
Copying Configuration Files via SNMP
To copy the running-config to the startup-config from the UNIX machine, use the following command.
• Copy the running-config to the startup-config from the UNIX machine.
snmpset -v 2c -c public force10system-ip-address copySrcFileType. index i 2
copyDestFileType. index i 3
Examples of Copying Configuration Files
The following examples show the command syntax using MIB object names and the same command using the object OIDs. In both
cases, a unique index number follows the object.
The following example shows copying configuration files using MIB object names.
> snmpset -v 2c -r 0 -t 60 -c private -m ./f10-copy-config.mib 10.10.10.10 copySrcFileType.
101
i 2 copyDestFileType.101 i 3
FTOS-COPY-CONFIG-MIB::copySrcFileType.101 = INTEGER: runningConfig(2)
FTOS-COPY-CONFIG-MIB::copyDestFileType.101 = INTEGER: startupConfig(3)
The following example shows copying configuration files using OIDs.
> snmpset -v 2c -c public -m ./f10-copy-config.mib 10.10.10.10
.1.3.6.1.4.1.6027.3.5.1.1.1.1.2.100 i 2 .1.3.6.1.4.1.6027.3.5.1.1.1.1.5.100 i 3
FTOS-COPY-CONFIG-MIB::copySrcFileType.100 = INTEGER: runningConfig(2)
FTOS-COPY-CONFIG-MIB::copyDestFileType.100 = INTEGER: startupConfig(3)
Simple Network Management Protocol (SNMP)
807