Dell S4048-ON, Configuration Manual

Page: 765 / 1039

secadmin Exec Config Interface Line
sysadmin Exec Config Interface Line Router IP RouteMap Protocol MAC
Example: Remove Security Administrator Access to Line Mode .
The following example removes the
secadmin
access to LINE mode and then verifies that the security administrator can no longer
access LINE mode, using the
show role mode configure line
command in EXEC Privilege mode.
Dell(conf)#role configure deleterole secadmin ?
LINE Initial keywords of the command to modify
Dell(conf)#role configure deleterole secadmin line
Dell(conf)#do show role mode ?
configure Global configuration mode
exec Exec Mode
interface Interface configuration mode
line Line Configuration mode
route-map Route map configuration mode
router Router configuration mode
Dell(conf)#do show role mode configure line
Role access:sysadmin
Example: Grant and Remove Security Administrator Access to Configure Protocols
By default, the system defined role,
secadmin,
is not allowed to configure protocols. The following example first grants the
secadmin
role to configure protocols and then removes access to configure protocols.
Dell(conf)#role configure addrole secadmin protocol
Dell(conf)#role configure deleterole secadmin protocol
Example: Resets Only the Security Administrator role to its original setting.
The following example resets only the
secadmin
role to its original setting.
Dell(conf)#no role configure addrole secadmin protocol
Example: Reset System-Defined Roles and Roles that Inherit Permissions
In the following example the command protocol permissions are reset to their original setting or one or more of the system-defined
roles and any roles that inherited permissions from them.
Dell(conf)#role configure reset protocol
Adding and Deleting Users from a Role
To create a user name that is authenticated based on a user role, use the
username
name password encryption-type
password
role
role-name command in CONFIGURATION mode.
Example
The following example creates a user name that is authenticated based on a user role.
Dell (conf) #username john password 0 password role secadmin
The following example deletes a user role.
NOTE: If you already have a user ID that exists with a privilege level, you can add the user role to username that has a
privilege
Dell (conf) #no username john
The following example adds a user, to the secadmin user role.
Dell (conf)#username john role secadmin password 0 password
Security
765