manualshive.com logo in svg

Dell S4048-ON, Configuration Manual

Share
Download
Dell S4048-ON Configuration Manual Download Page 579

Figure 102. OSPF Routing Examples

Backbone Router (BR)

A backbone router (BR) is part of the OSPF Backbone, Area 0.

This includes all ABRs. It can also include any routers that connect only to the backbone and another ABR, but are only part of Area 
0, such as Router I in the previous example.

Area Border Router (ABR)

Within an AS, an area border router (ABR) connects one or more areas to the backbone.

The ABR keeps a copy of the link-state database for every area it connects to, so it may keep multiple copies of the link state 
database. An ABR takes information it has learned on one of its attached areas and can summarize it before sending it out on other 
areas it is connected to.
An ABR can connect to many areas in an AS, and is considered a member of each area it connects to.

Open Shortest Path First (OSPFv2 and OSPFv3)

579

Summary of Contents for S4048-ON
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands