4–Switch Independent Partitioning
Switch Independent Partitioning Setup and Management Options
162
CU0354602-00 L
When partitioning is enabled, the Adapter Properties page appears, as
shown in
Figure 4-27
.
Figure 4-27. Partition Enabled
5.
Click
OK
to close the message box that displays the following information:
This change requires a reboot. Proceed?
6.
Click
OK
to close the message box that displays the following information:
Please reboot the system now
7.
Reboot the host server to make the changes take effect.
Change Personalities
To change function types (
personalities
) as needed for your network:
1.
From the Server Manager, select
Diagnostics
, then select
Device
Manager
, and then select
Network Adapters
.
2.
Right-click on the appropriate
QLogic 10 Gigabit Ethernet CNA
device to
change the function type and select
Properties
from the shortcut menu.
