5–Boot Configuration
iSCSI Configuration Using Fast!UTIL
211
CU0354602-00 L
a.
To scan for the specified target, highlight the primary LUN
Target IP
and then press ENTER.
b.
Select the target from the list of discovered targets on the
Select iSCSI
Device
window, as shown in
Figure 5-27
.
Figure 5-27. Fast!UTIL: Select iSCSI Device Window
c.
On the
Select LUN
window, select the LUN to set the target as the
primary iSCSI boot device.
9.
Press ESC and then select
Save changes
.
10. Press ESC again and then select
Reboot System
.
After rebooting, the iSCSI BIOS loads for the target configured previously in
the QLogic iSCSI
Fast!
UTIL BIOS utility.
