manualshive.com logo in svg

Dell QLE8262, User Manual

The Dell QLE8262 is a high-performance network adapter designed for seamless connectivity. To ensure easy usage, we provide a comprehensive User Manual that can be downloaded for free from manualshive.com. This manual contains all the essential instructions and guidelines to maximize the potential of your Dell QLE8262.

Share
Download
background image

4–Switch Independent Partitioning
Switch Independent Partitioning Configuration

134

CU0354602-00  L

For procedures on setting up Switch Independent Partitioning and eSwitch 
parameters using the OptionROM while powering up the host server, see 

“QLogic 

OptionROM at POST” on page 145

.

QConvergeConsole GUI

The QConvergeConsole Unified Adapter Web Management Interface is a 
Web-based client/server application that allows for centralized management and 
configuration of QLogic adapters within the entire network (LAN and SAN).

On the server side, the QConvergeConsole runs as an Apache Tomcat server 
Web application. After the application is launched on the Web server, you can 
connect to the QConvergeConsole’s GUI through a browser, either locally on the 
server or remotely from another computer. Your browser window becomes the 
client used to connect to Dell PowerEdge blade servers that host the adapters 
and connected storage devices within the network.

In addition to the configuration and management tools available through the 
QConvergeConsole GUI, QConvergeConsole enables you to partition and 
configure NIC ports and eSwitch parameters on the adapters.

Follow the procedures in 

“Installing the QConvergeConsole GUI” on page 238

 to 

install the QConvergeConsole GUI application on a Windows or Linux server. 
Before using the QConvergeConsole GUI to configure Switch Independent 
Partitioning on your adapters, you must also install the drivers on the Dell 
PowerEdge blade server where the adapter resides.

Before configuring Switch Independent Partitioning, do the following:

Use the QLogic SuperInstaller for your host server’s operating system 
(Windows or Linux) to install the Fibre Channel/FCoE, NIC, and iSCSI 
drivers on the server where the adapters reside. To download the installers 
and drivers, go to 

http://support.dell.com

.

Make sure the remote agents are running on the Tomcat server where the 
QConvergeConsole GUI application resides:

Fibre Channel/FCoE (

qlremote

) 

NIC (

netqlremote

)

iSCSI (

iqlremote

) 

                                                                                           

Summary of Contents for QLE8262






































































































































































































































































Reviews:

No comments

Related manuals for QLE8262

Accelerated 6330-MX User Manual preview
6330-MX
Brand: Accelerated Pages: 10
Accelerated 6300-CX Customer Setup Instructions preview
6300-CX
Brand: Accelerated Pages: 4
PaloAlto Networks PA-5400 Series Quick Start Manual preview
PA-5400 Series
Brand: PaloAlto Networks Pages: 2
Raritan DOMINION SX - Quick Setup Manual preview
DOMINION SX -
Brand: Raritan Pages: 4
Paradyne Comsphere 3510 User Manual preview
Comsphere 3510
Brand: Paradyne Pages: 85
NETGEAR WAG302 Installation Manual preview
WAG302
Brand: NETGEAR Pages: 2
Perle P841 Specifications preview
P841
Brand: Perle Pages: 2
QNAP Turbo NAS TVS-71 Series Hardware User Manual preview
Turbo NAS TVS-71 Series
Brand: QNAP Pages: 51
Juniper MX480 Hardware Manual preview
MX480
Brand: Juniper Pages: 420
INNOSILICON T3-43T User Manual preview
T3-43T
Brand: INNOSILICON Pages: 11
Commax CVN-0430F User Manual preview
CVN-0430F
Brand: Commax Pages: 122
Motorola solutions Avigilon HD-NVR4-PRM-128TB User Manual preview
Avigilon HD-NVR4-PRM-128TB
Brand: Motorola solutions Pages: 31
Crestron CNXIRP Installation Instructions preview
CNXIRP
Brand: Crestron Pages: 2
Cisco C190 Quick Start Manual preview
C190
Brand: Cisco Pages: 14
MikroTik RouterBOARD M33G Manual preview
RouterBOARD M33G
Brand: MikroTik Pages: 7
Texas Instruments SPRU938B User Manual preview
SPRU938B
Brand: Texas Instruments Pages: 48
Transition Networks CPSMM-200 User Manual preview
CPSMM-200
Brand: Transition Networks Pages: 7
Transition Networks NM2-GXE-2230-01 Series Install Manual preview
NM2-GXE-2230-01 Series
Brand: Transition Networks Pages: 15

Brands by name

Popular brands

Load more brands