3–Adapter Management Applications
General Management with QConvergeConsole
70
CU0354602-00 L
3.
To view the CHAP map table to determine the CHAP index to use later to
link the CHAP entry to a target, issue the
–dspchap
command. The
positional parameter for this command is
<
hba_port_inst
>
.
Command line options:
-dspchap <
hba_port_inst
>
In the following examples, the HBA port instance = 0.
$qaucli -pr iscsi -dspchap 0
Or:
$qaucli -iscsi -dspchap 0
CHAP TABLE
Entry: 1
Name: chapdbserver1
Secret: k9Q038iaZwlqPplq012
4.
Add a persistent Send Target to discover, and log in with dynamic entries to
discovered targets by issuing the
–pa
command. The
–pa
command adds a
persistent target. The positional parameters are
<
hba_port_inst
>
and
<
ip address
>. The optional parameters are
[-PORT
port_num
] and
[-INAME
name
]
. If the optional port number is not specified, it defaults to
3260. If the optional
INAME
(iSCSI name) is not specified, it defaults to an
empty string.
Command line options:
-pa <
hba_port_inst
> <
ip address
> [-PORT
port_num
] [-INAME
name
]
Example:
In the following examples, the HBA port instance is 0, and the Send Target
IP is 10.14.64.154.
$qaucli -pr iscsi -pa 0 10.14.64.154
Or:
$qaucli -iscsi -pa 0 10.14.64.154
5.
To display a persistent Send Target entry, issue the
-ps
command (you
should initially expect a failed connection because the target is not yet linked
to CHAP). The
-ps
command lists persistent (bound) targets. The positional
parameter is
[hba_port_inst [
target_id
]]
. If no
target_id
is
specified, all targets for the specified
hba_port_inst
are shown. If neither
the
hba_port_inst
nor
target_id
are specified, all
target_id
s for all
adapters in the system are shown.
Command line options:
-ps <
hba_port_inst
> [
target_id
]
