manualshive.com logo in svg

Dell QLE8262, User Manual

The Dell QLE8262 is a high-performance network adapter designed for seamless connectivity. To ensure easy usage, we provide a comprehensive User Manual that can be downloaded for free from manualshive.com. This manual contains all the essential instructions and guidelines to maximize the potential of your Dell QLE8262.

Share
Download
background image

4–Switch Independent Partitioning
Switch Independent Partitioning Configuration

127

CU0354602-00  L

You can modify the minimum and maximum bandwidth for each 
switch-independent partition. The changes take effect immediately without 
rebooting the server. The minimum and maximum bandwidths are specified as 
percentages of the link bandwidth, where:

The minimum bandwidth is the minimum bandwidth guaranteed to a 
partition. 

The maximum bandwidth is the maximum value that a partition is permitted 
to use.

Switch Independent Partitioning Options

The Switch Independent Partitioning feature in QLogic adapters provides the 
ability to create multiple PCIe physical functions for each physical 10GbE port on 
the adapter. Each PCIe function appears as an independent interface to the host 
operating system or hypervisor.

When the adapter is configured as an Ethernet-only adapter, it contains eight 
Ethernet functions.

By default, Switch Independent Partitioning functionality is disabled on the 
adapters, having only two Ethernet functions enabled. Depending on the feature 
personality mapping supported on the adapter, you can enable additional Ethernet 
or storage functions.

The PCI function number assignment is as follows:

Functions 0 and 1 are always NIC, function 0 for port 1 and function 1 for 
port 2; any of the other functions can be individually enabled or disabled.

Functions 2 and 3 can only be NIC personalities.

Functions 4 and 5 can be configured with either iSCSI or NIC personality.

Functions 6 and 7 can be configured with either FCoE or NIC personality.

You can configure at most one iSCSI and one FCoE personality for each 
physical port.

NOTE

When bandwidth settings exist for both Switch Independent Partitioning and 
DCBX, 

DCBX takes precedence over Switch Independent Partitioning

. 

DCBX sets the bandwidth for iSCSI and NIC traffic, and then Switch 
Independent Partitioning sets the bandwidth for the NIC partitions by dividing 
the NIC bandwidth allocated by DCBX. For more information, see 

“Interoperation of Bandwidth Settings for DCBX and Switch Independent 
Partitioning” on page 121

.

Summary of Contents for QLE8262






































































































































































































































































Reviews:

No comments

Related manuals for QLE8262

Cambium Networks PTP 820 Series Manual preview
PTP 820 Series
Brand: Cambium Networks Pages: 29
Eaton Power Xpert Meter 2000 Instructions Manual preview
Power Xpert Meter 2000
Brand: Eaton Pages: 16
Eaton POW-R-COMMAND 1000 User Manual preview
POW-R-COMMAND 1000
Brand: Eaton Pages: 84
Ubiquiti airFiber AF-5X User Manual preview
airFiber AF-5X
Brand: Ubiquiti Pages: 50
dixell XT120C Installing And Operating Insructions preview
XT120C
Brand: dixell Pages: 4
Teac HD-35NAS User Manual preview
HD-35NAS
Brand: Teac Pages: 20
Maple Systems cMT-FHDX Series Installation Instruction preview
cMT-FHDX Series
Brand: Maple Systems Pages: 2
NETGEAR Powerline 100 Installation Manual preview
Powerline 100
Brand: NETGEAR Pages: 2
Extron electronics PoleVault System A/V Source Inputs Specification Sheet preview
PoleVault System A/V Source Inputs
Brand: Extron electronics Pages: 4
Paradyne Hotwire 6341 Installation Instructions Manual preview
Hotwire 6341
Brand: Paradyne Pages: 23
Draytek Vigor 2760 Series Quick Start Manual preview
Vigor 2760 Series
Brand: Draytek Pages: 54
Patton 13243D4-001 User Manual preview
13243D4-001
Brand: Patton Pages: 62
Tenda DH301 User Manual preview
DH301
Brand: Tenda Pages: 120
Digisol DG-SR2004 User Manual preview
DG-SR2004
Brand: Digisol Pages: 73
PairGain HiGain Line Unit HLU-388 Quick Installation Manual preview
HiGain Line Unit HLU-388
Brand: PairGain Pages: 7
AMG AMG9050 series Instruction Manual preview
AMG9050 series
Brand: AMG Pages: 4
WatchNet ENM-04 POE Quick Connection Manual preview
ENM-04 POE
Brand: WatchNet Pages: 2
Gigabyte GN-WIKG User Manual preview
GN-WIKG
Brand: Gigabyte Pages: 10

Brands by name

Popular brands

Load more brands