manualshive.com logo in svg

Dell QLE8262, User Manual

The Dell QLE8262 is a high-performance network adapter designed for seamless connectivity. To ensure easy usage, we provide a comprehensive User Manual that can be downloaded for free from manualshive.com. This manual contains all the essential instructions and guidelines to maximize the potential of your Dell QLE8262.

Share
Download
background image

3–Adapter Management Applications
General Management with QConvergeConsole

57

CU0354602-00  L

IPv6_Addr_Routable0                 :  ::

IPv6_Addr_Routable1                 :  ::

Default_IPv6_Router                 :  ::

IPv6_Port                           :  3260

IPv6_Gratuitious_Neighbor_Ad_Enable :  off

IPv6_Redirect_Enable                :  off

*** Displaying IPv6 TCP Settings inst=0 ***

IPv6_Nagle                          :  off

IPV6_TCP_Timer_Scale                :  3(*)

IPv6_TCP_Time_Stamp                 :  on

*** Displaying Remaining parameters inst=0 ***

ACB_Supported                       :  on(*)

Values noted with (*) are read only.

Modifying Port-Level iSCSI Parameters

Use the 

–n

 command to modify port-level iSCSI parameters.

Command line options:

-n <

hba_port_inst

> <

config_name

|

config_alia

s> <

value

> 

<

config_name

|

config_alias

> <

value

>

Example:

In the following example, the HBA port instance is 0, and the parameter 
change is to turn on iSCSI header digests.

$qaucli -pr iscsi -n 0 iSCSI_Header_Digests on

Or:

$qaucli -iscsi -n 0 iSCSI_Header_Digests on
Port Parameters:
The following table lists the parameters that may be configured using 
the -n option in non-interactive mode.
Full Parameter Name                 Alias Name  Allowable Values
-------------------                 ----------  ---------------- 
AFW_Device_Timeouts                 AFWDT       on or off 
AFW_Delayed_Ack                     AFDACK      on or off 
AFW_AutoConnect                     AFWC        on or off 
AFW_Serlz_Task_Mngmt                AFWSTM      on or off 
ExeThrottle                         ET          0 to 32767
FirstBurstLen                       FB          0 to 32767
Force_Negotiate_Main_iSCSI_Keys     FNMIK       on or off 
IP_ARP_Redirect                     IPARP       on or off 
IPv6_MCast_Listnr_Disco_Enable      IPV6MLDEN   on or off 
iSCSI_Alias                         IALS        Character string
iSCSI_Header_Digests                IHD         on or off 
iSCSI_Data_Digests                  IDD         on or off 
iSCSI_Immediate_Data                IID         on or off 
iSCSI_Initial_R2T                   IIR2T       on or off 
iSCSI_Snack                         ISNACK      on or off 

Summary of Contents for QLE8262






































































































































































































































































Reviews:

No comments

Related manuals for QLE8262

D-Link ShareCenter DNS-320L Datasheet preview
ShareCenter DNS-320L
Brand: D-Link Pages: 4
National Instruments NI 9871 Operating Instructions Manual preview
NI 9871
Brand: National Instruments Pages: 24
National Instruments NI 9478 Operating Instructions Manual preview
NI 9478
Brand: National Instruments Pages: 32
National Instruments FIELDPOINT FP-1600 Operating Instructions Manual preview
FIELDPOINT FP-1600
Brand: National Instruments Pages: 8
D-Link G416 User Manual preview
G416
Brand: D-Link Pages: 176
Kasda LinkSmart KW6515 User Manual preview
LinkSmart KW6515
Brand: Kasda Pages: 31
HELVAR Imagine 920 Installation Manual preview
Imagine 920
Brand: HELVAR Pages: 2
ANEP P4GU VoLTE Technical Data Sheet preview
P4GU VoLTE
Brand: ANEP Pages: 48
Patton electronics ipRocketLink IAD 3086 Quick Start Manual preview
ipRocketLink IAD 3086
Brand: Patton electronics Pages: 12
Airlinkplus ASW224 User Manual preview
ASW224
Brand: Airlinkplus Pages: 20
KYLAND Technology KIEN1009 Hardware Installation Manual preview
KIEN1009
Brand: KYLAND Technology Pages: 24
National Instruments Monochrome Image Acquisition Device NI 1410 User Manual preview
Monochrome Image Acquisition Device NI 1410
Brand: National Instruments Pages: 34
ZyXEL Communications GS-2724 User Manual preview
GS-2724
Brand: ZyXEL Communications Pages: 348
KYLAND Technology KIEN3016A Hardware Installation Manual preview
KIEN3016A
Brand: KYLAND Technology Pages: 19
Genexis FiberTwist XGS2410 Installation Manual preview
FiberTwist XGS2410
Brand: Genexis Pages: 7
QSC Q-SYS QIO-GP8x8 Hardware User Manual preview
Q-SYS QIO-GP8x8
Brand: QSC Pages: 13
National Instruments NI 653x User Manual preview
NI 653x
Brand: National Instruments Pages: 147
Hirschmann MM2-2FXM3/2TX1 Description And Operating Instructions preview
MM2-2FXM3/2TX1
Brand: Hirschmann Pages: 8

Brands by name

Popular brands

Load more brands