Different codes display as drive events occur in the system. For example, in the event of a hard-drive failure, the "drive
failed" code appears. After the drive is selected for removal, the "preparing for removal" code appears. After the replacement
drive is installed, the "preparing for operation, drive online" code appears.
NOTE:
The drive-busy indicator signifies whether the hard drive is active on the SCSI bus. This indicator is controlled
by the hard drive.
Table 2-6. SCSI Hard-Drive Indicator Codes
Drive Status Indicator
Indicator Code
Drive bay empty, ready for insertion or
removal
Off
Drive being prepared for operation, drive
online
Steady green
Drive being identified
Blinks green four times per second
Drive being prepared for removal
Blinks green twice per second at equal intervals
Drive rebuilding
Blinks green twice per second at unequal intervals
Drive failed
Blinks amber four times per second
Predicted failure for the drive
Blinks green, then amber, and then off, repeating this sequence every two
seconds
NIC Indicator Codes
Each NIC on the back panel has an indicator that provides information on network activity and link status (see
Figure 2-6
).
Table 2-7
lists the NIC indicator codes on the back panel.
The front panel has a link indicator for each NIC (see
Figure 2-2
). Each indicator signifies whether the corresponding NIC is
connected to a valid link partner on the network.
Figure 2-6. NIC Indicators
Summary of Contents for PowerVault 775N
Page 3: ...Back to Contents Page ...
Page 65: ...Back to Contents Page ...
