Dell PowerEdge KVM 1081AD, User Manual

Page: 70 / 244

54
Controlling Your System at the Analog Ports
1 In the Scan dialog box, select the device to be removed.
or
Double-click on the device name or port.
or
Click the Clear button to remove all devices from the scan list.
2 Click OK .
To start the scan mode:
1
Press <Print Screen> to launch the OSCAR interface. The
Main
dialog
box appears.
2
Click
Commands
. The
Commands
dialog box displays.
3 Select Scan Enable in the Commands dialog box.
4 Click X to close the Commands dialog box.
NOTE:
If the Add/Remove button is clicked when a device is highlighted, the check
box corresponding to the highlighted device toggles state.
To cancel scan mode:
1 Select a device if the OSCAR interface is open.
or
Move the mouse or press any key on the keyboard if the OSCAR interface
is not open. Scanning stops at the currently selected device.
or
Press <Print Screen>. The Main dialog box will appear.
2
Click Commands . The Commands dialog box displays.
3
Clear
Scan Enable .
Setting the Preemption Warning
Administrators and users with equal or higher access rights than current user
can preempt (disconnect) KVM sessions and take control of the target device.
You can choose whether or not to warn the first user that the session will be
preempted and specify how long the appliance will wait for the first user to
respond to the warning.
To view or change the preemption warning settings, complete the following
steps:
1 Press <Print Screen> to launch the OSCAR interface. The Main dialog
box appears.