Dell PowerConnect J-8216 Hardware Manual Download Page 38

Page: 38 / 270

Table 11: LCD Panel Menu Options for the J-EX8200 Switch

(continued)

Description

The Status menu has the following options:

•

Switch fabric status—Choose one of the following:

•

Press

Enter

to display the status of the switch fabric in the SF modules (SF) in J-EX8216 switches: OK, Fld

(failed), ABS (absent)

•

Press

to go to the next option in the Status menu.

•

Power supply status (1)—Choose one of the following:

•

Press

Enter

to display the status of power supplies 0 and 1: OK, Fld, ABS.

•

Press

to go to the next option in the Status menu.

•

Power supply status (2)—Choose one of the following:

•

Press

Enter

to display the status of power supplies 2, 3, 4, and 5: OK, Fld, ABS.

•

Press

to go to the next option in the Status menu.

•

Environment status—Choose one of the following:

•

Press

Enter

to display the status of the fan tray(s) and the chassis temperature:

•

Fan tray(s) status: OK, Fld, ABS

•

Chassis temperature status: OK, High, Shutdown

•

Press

to go to the next option in the Status menu.

•

Junos OS version status—Choose one of the following:

•

Press

Enter

to display the version of Junos OS for J-EX Series switches loaded on the switch.

•

Press

to go to the next option in the Status menu.

•

EXIT STAT MENU?—Choose one of the following:

•

Press

Enter

to exit the Status menu.

•

Press

to return to the Switch fabric status option.

If you do not want users to use Status menu options, disable the entire menu or individual menu options. For
instructions, see the

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

http://www.support.dell.com/manuals

Status

Dell PowerConnect J-Series J-EX8216 Ethernet Switch Hardware Guide

Summary of Contents for PowerConnect J-8216















































































































































































































































































Search results

Summary of Contents for PowerConnect J-8216

Reviews:

Brands by name

Popular brands

Dell PowerConnect J-8216, Hardware Manual

Search results

Summary of Contents for PowerConnect J-8216

Reviews:

Brands by name

Popular brands