Dell PowerConnect B-Series TI24X Hardware Installation Guide
5
53-1002265-01
Hardware features
1
10/100/1000 ports on the PowerConnect B-Series TI24X support RJ-45 copper connectors. The
output of the show media command displays C next to the ports that have copper connectors
installed.
Gigabit copper ports on the PowerConnect B-Series TI24X support auto MDI or MDIX detection. For
more information about this feature, refer to "Configuring MDI/MDIX" in the
PowerConnect B-Series
TI24X Configuration Guide
.
LEDs for network interfaces and power supplies
The fiber and copper ports on PowerConnect B-Series TI24X provide status information through the
LEDs listed in
. The LEDs for network interfaces and power supplies are:
•
24 10-Gbps fiber ports (1~24 port) have LEDs located under each of them.
•
Four 10/100/1000 copper ports (25~28) have Link and Activity LEDs to indicate port status.
•
The Management port has a Link LED and Activity LED to indicate port status. The Link LED is
on the left of the copper connector and the Activity LED is on the right.
•
The System power on LED is on the left side of the front panel.
•
The dual power supply 1 and 2 LEDs are on the front panel of the power supply (when you are
facing the rear of the device).
.
TABLE 2
LEDs
LEDs
Position
State
Meaning
10Gbps Port LEDs
LNK or ACT
Located under the 10-GbE
ports
On
The port is connected.
Off
No fiber port connection exists or the
link is down.
Blinking
Traffic is begin transmitted or
received on the fiber port.
10/100/1000 Copper Port LEDs
Lnk
This is the left LED on RJ45
On
The port is connected.
Off
No copper port connection exists or
the link is down.
Act
This is the right LED on RJ45
On or Blinking
Traffic is being transmitted or
received on the copper port.
Off
No traffic is being transmitted or
received on the copper port.
Management Port LEDs
Lnk
This is the left LED on RJ45
On
The port is connected.
Off
No copper port connection exists or
the link is down.
Act
This is the right LED on RJ45
On or Blinking
Traffic is being transmitted or
received on the copper port.
Off
No traffic is being transmitted or
received on the copper port.
System Power and Power Supply LEDs
