Dell PowerConnect 6024, Command Line Interface Reference Manual

Page: 51 / 504

Using the CLI
51
To return from the Privileged EXEC mode to the User EXEC mode, use the disable command.
The following example illustrates how to access the Privileged EXEC mode and return to the User
EXEC mode:
Command Exit is used to move back from any mode to a previous level mode, except from
Privileged EXEC to User EXEC mode, for example from Interface Configuration mode to Global
Configuration mode, and from Global Configuration mode to Privileged EXEC mode.
Global Configuration Mode
Global configuration commands apply to features that affect the system as a whole, rather than just
a specific interface. The Privileged EXEC mode command
configure is used to enter the Global
Configuration mode.
The Global Configuration mode commands perform the following:
1
At the Privileged EXEC mode prompt, enter the command configure and press <Enter>.
The Global Configuration mode prompt is displayed. The Global Configuration mode
prompt consists of the device "host name" followed by the word "(config)" and "
# ".
To return from Global Configuration mode to Privileged EXEC mode, the user can use one of the
following commands:
• exit
• end
• Ctrl+Z
The following example illustrates how to access the Global Configuration mode and return to the
Privileged EXEC mode:
Console> enable
Enter Password: ******
Console #
Console # disable
Console>
Console(config)#
Console#
Console# configure
Console(config)# exit
Console#