Dell PowerConnect 6024, Command Line Interface Reference Manual

Page: 354 / 504

354
SNMP Commands
www
.dell.com | support.dell.com
• writeview —Specifies a string that is the name of the view that enables entering data and
configuring the contents of the agent. If unspecified, nothing is defined for the write
view. (Range: 1-30 characters)
• notifyview —Specifies a string that is the name of the view that enables specifying an
inform or a trap. If unspecified, nothing is defined for the notify view. (Range: 1-30
characters)
Default Configuration
No group entry exists.
Command Mode
Global Configuration mode
User Guidelines
The Router context is translated to the “” context in the MIB.
The index of the group name table is comprised of Group Name , Security Model , and
Security Level . Different views for the same group can be defined with different security
levels. Thus, for example, after having created the appropriate views, a group can be created
for which "no authentication" is required, while allowing only notification view for
"interfaces". A group of the same name can be created for which "priv" authentication is
required. Read views can, for example, be configured for this group for mib2, and write views
for interfaces. In this case, users in this group who send "priv" packets can modify all
"interfaces" MIBs and view all mib2.
Examples
The following example attaches a group called user-group to SNMPv3 and assigns to the group the
privacy security level and read access rights to a view called user-view .
snmp-server filter
The snmp-server filter global configuration command creates or updates a Simple Network
Management Protocol (SNMP) server filter entry. To remove the specified SNMP server filter entry,
use the
no form of this command.
Syntax
snmp-server filter filter-name oid-tree { included | excluded }
no snmp-server filter filter-name [ oid-tree ]
• filter-name —Specifies the label for the filter record that is being updated or created. The
name is used to reference the record. (Range: 1-30 characters)
Console (config)# snmp-server group user-group v3 priv read user-
view