Dell PowerConnect 6024, Command Line Interface Reference Manual

Page: 306 / 504

306
QoS Commands
www
.dell.com | support.dell.com
Example
The following example maps DSCP values 12 and 58 to value 56 while out of profile.
class-map
The class-map global configuration command creates class maps and enters the class-map
configuration mode. To delete a class, use the no form of this command.
Syntax
class-map class-map-name [ match-all | match-any ]
no class-map
class-map-name
• class-map-name —Specifies the class-map name consisting of a character string 32
characters long.
• match-all —Performs a logical AND condition on the IP and MAC ACLs in the class
map. All criteria within all the individual ACLs must be matched.
• match-any —Performs the logical OR condition, which requires that all the criteria within
any ACL in the class does not have to be matched. It is sufficient for one criterion to be
matched.
Default Configuration
If neither the match-all or match-any is specified, the default is match-all .
Command Mode
Global Configuration mode
User Guidelines
An error message is generated if there is more than one match statement in a match all class
map, and if there is a repetitive classification field in the participation ACL.
In quality of service (QoS) class-map configuration mode, these configuration commands are
available:
• exit —Exits from QoS class-map configuration mode.
• match —Configures classification criteria.
• no —Removes a match statement from a class map.
Console (config)# qos map policed-dscp 12 58 to 56