manualshive.com logo in svg

Dell PowerConnect 6024, Command Line Interface Reference Manual

Share
Download
Dell PowerConnect 6024 Command Line Interface Reference Manual Download Page 44

44

Command Groups

www

.dell.com | support.dell.com

Syslog Commands

System Management Commands

Command Group

Description

Mode

logging on

Controls error messages logging.

GC

logging

Logs messages to a syslog server. 

GC

logging console

Limits messages logged to the console based on severity. 

GC

logging buffered

Limits syslog messages displayed from an internal buffer based on 
severity. 

GC

logging buffered size

Changes the number of syslog messages stored in the internal buffer.

GC

clear logging

Clears messages from the internal logging buffer.

PE

logging file

Limits syslog messages sent to the logging file based on severity. 

GC

clear logging file

Clears messages from the logging file.

PE

aaa logging

Enables logging AAA login events.

GC

file-system logging

Enables logging file system events.

GC

management logging

Enables logging management access list (ACL) events.

GC

show logging

Displays the state of logging and the syslog messages stored in the 
internal buffer.

PE

show logging file

Displays the state of logging and the syslog messages stored in the 
logging file.

PE

show syslog-servers

Displays the syslog servers settings.

PE

Command Group

Description

Mode

ping

Sends ICMP echo request packets to another node on the network.

UE

reload

Reloads the operating system.

PE

clock set

Manually sets the system clock.

PE

hostname

Specifies or modifies the device host name. 

GC

asset-tag

Specifies the device asset-tag. 

GC

show users

Displays information about the active users.

UE

show clock

Displays the time and date from the system clock.

UE

show system

Displays system information.

UE

show version

Displays the system version information.

UE

show system id

Displays the service ID information.

PE

Summary of Contents for PowerConnect 6024

























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands