Dell PowerConnect 6024, Command Line Interface Reference Manual

Page: 29 / 504

Command Groups
29
Clock Commands
bridge multicast forbidden
forward-all Enables forbidding forwarding of all Multicast packets to a port. VC
bridge aging-time Sets the address table aging time. GC
clear bridge Removes any learned entries from the forwarding database. PE
port security Disables new address learning on an interface. IC
port security routed secure-
address Adds MAC-layer secure addresses to a routed port. IC
show bridge address-table Displays dynamically created entries in the bridge-forwarding
database. PE
show bridge address-table static Displays statically created entries in the bridge-forwarding database. PE
show bridge multicast address-
table Displays Multicast MAC address table information. PE
show bridge multicast filtering Displays the Multicast filtering configuration. PE
show ports security Displays the port-lock status. PE
Command Group Description Mode
clock source Configures an external time source to maintain the system clock GC
clock timezone Defines the time zone for display purposes GC
clock summer-time Configures the system clock to automatically switch to Daylight
Savings Time GC
sntp authentication-key Defines an authentication key for SNTP GC
sntp authenticate Set to require authentication for received NTP traffic from servers GC
sntp trusted-key Defines the authentication key used to authenticate the SNTP server GC
sntp client poll timer Defines polling time for the SNTP client. GC
sntp broadcast client enable Enables SNTP Broadcast clients GC
sntp anycast client enable Enables SNTP Anycast clients GC
sntp client enable Enables SNTP Broadcast and Anycast clients on an interface IC
sntp unicast client enable Enables predefined SNTP Broadcast Unicast clients GC
sntp unicast client poll Enables polling predefined SNTP Broadcast Unicast clients GC
sntp server Configures the device to use SNTP to request and accept NTP traffic
from a server GC
show clock Displays the time and date of the system clock UE