Dell Latitude E4300 Service Manual Download Page 48

Page: 48 / 87

Display Assembly: Dell Latitude E4300 Service Manual

file:///C|/Biz%20Client/2015/Lola%20(Defect%20Fix)/display.htm[5/25/2015 11:14:10 AM]

9. Replace the LED dashboard cover (see

Replacing the LED Dashboard Cover

10. Close the display and turn the computer upside-down.

11. Replace the four M2.5 x 4-mm screws securing the display assembly to the back of the computer.

12. Follow the instructions in

After Working on Your Computer

Removing the Display Bezel

1. Follow the instructions in

What You Need to Know For Your Safety

2. Remove the display assembly (see

Removing the Display Assembly

NOTE:

Removal of the bezel from the display back cover requires extreme care to avoid damaging the bezel.

3. Starting at the middle bottom of the display panel, use your fingers to lift the inner edge of the bezel; place your

fingers under the inner edge of the bezel and roll the outer edge of the bezel free of the display back cover.

4. Starting at the edges of the bottom of the display panel, use your fingers to separate the bezel from the top cover by

lifting the inside edge of the bezel away from the display back cover.

1 bezel 2 display panel

Replacing the Display Bezel

NOTE:

This procedure assumes that you have completed the removal procedure first.

Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the display panel.

Removing the Display Hinges

Summary of Contents for Latitude E4300
























































































Search results

Summary of Contents for Latitude E4300

Reviews:

Related manuals for Latitude E4300

Brands by name

Popular brands

Dell Latitude E4300, Service Manual

Search results

Summary of Contents for Latitude E4300

Reviews:

Related manuals for Latitude E4300

Brands by name

Popular brands