Troubleshooting: Dell Latitude E4300 Service Manual
file:///C|/Biz%20Client/2015/Lola%20(Defect%20Fix)/trouble.htm[5/25/2015 11:14:02 AM]
1. Click
Start
®
Control Panel
®
Programs
®
Programs and Features
.
2. Select the program you want to remove.
3. Click
Uninstall
.
4. See the program documentation for installation instructions.
Windows XP
:
1. Click
Start
®
Control Panel
®
Add or Remove Programs
®
Programs and Features
.
2. Select the program you want to remove.
3. Click
Uninstall
.
4. See the program documentation for installation instructions.
drive letter
:\ is not accessible. The device is not ready —
The drive cannot read the disk. Insert a disk into the drive
and try again.
Insert bootable media —
Insert a bootable floppy disk, CD, or DVD.
Non-system disk error —
Remove the floppy disk from the floppy drive and restart your computer.
Not enough memory or resources. Close some programs and try again —
Close all windows and open the program
that you want to use. In some cases, you may have to restart your computer to restore computer resources. If so, run the
program that you want to use first.
Operating system not found —
Contact Dell (see
Contacting Dell
).
IEEE 1394 Device Problems
CAUTION:
Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at www.dell.com/regulatory_compliance.
NOTE:
Your computer supports only IEEE 1394a standard.
Ensure that the cable for the IEEE 1394 device is properly inserted into the device and into the connector on the
computer
Ensure that the IEEE 1394 device is enabled in system setup —
See "System Setup Options" in the
Dell Technology
Guide
on your computer or at
support.dell.com
.
Ensure that the IEEE 1394 device is recognized by Windows —
Windows Vista
:
1. Click
Start
®
Control Panel
®
Hardware and Sound
.
2. Click
Device Manager.
Windows XP
:
1. Click
Start and click
Control Panel
.
2. Under
Pick a Category
, click
Performance and Maintenance
®
System
®
System Properties
®
Hardware
®
Device Manager
.
If your IEEE 1394 device is listed, Windows recognizes the device.
If you have problems with a Dell IEEE 1394 device —
Contact Dell (see
Contacting Dell
).
If you have problems with an IEEE 1394 device not provided by Dell —
Contact the IEEE 1394 device manufacturer.