Dell Latitude E4300 Service Manual Download Page 17

Page: 17 / 87

Troubleshooting: Dell Latitude E4300 Service Manual

file:///C|/Biz%20Client/2015/Lola%20(Defect%20Fix)/trouble.htm[5/25/2015 11:14:02 AM]

CAUTION:

Before working inside your computer, read the safety information that shipped with your

computer. For additional safety best practices information, see the Regulatory Compliance Homepage on

www.dell.com at www.dell.com/regulatory_compliance.

NOTE:

If you need technical assistance for your printer, contact the printer's manufacturer.

Check the printer documentation —

See the printer documentation for setup and troubleshooting information.

Ensure that the printer is turned on.

Check the printer cable connections —

See the printer documentation for cable connection information.

Ensure that the printer cables are securely connected to the printer and the computer.

Test the electrical outlet —

Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

Verify that the printer is recognized by Windows —

Windows Vista

1. Click

Start

Control Panel

Hardware and Sound

Printer

2. If the printer is listed, right-click the printer icon.

3. Click

Properties and click Ports

4. Adjust the settings, as needed.

Windows XP:

1. Click

Start

Control Panel

Printers and Other Hardware

View installed printers or fax printers

2. If the printer is listed, right-click the printer icon.

3. Click

Properties

Ports

. For a parallel printer, ensure that the

Print to the following port(s):

setting is

LPT1

(Printer Port)

. For a USB printer, ensure that the

Print to the following port(s):

setting is

USB

Reinstall the printer driver —

See the printer documentation for information on reinstalling the printer driver.

Scanner Problems

CAUTION:

Before working inside your computer, read the safety information that shipped with your

computer. For additional safety best practices information, see the Regulatory Compliance Homepage on

www.dell.com at www.dell.com/regulatory_compliance.

NOTE:

If you need technical assistance for your scanner, contact the scanner's manufacturer.

Check the scanner documentation —

See the scanner documentation for setup and troubleshooting information.

Unlock the scanner —

Ensure that your scanner is unlocked (if the scanner has a locking tab or button).

Restart the computer and try the scanner again

Check the cable connections —

See the scanner documentation for information on cable connections.

Ensure that the scanner cables are securely connected to the scanner and the computer.

Verify that the scanner is recognized by Microsoft Windows —

Windows Vista

1. Click

Start

Control Panel

Hardware and Sound

Scanners and Cameras

2. If the scanner is listed, Windows recognizes the scanner.

Summary of Contents for Latitude E4300
























































































Search results

Summary of Contents for Latitude E4300

Reviews:

Related manuals for Latitude E4300

Brands by name

Popular brands

Dell Latitude E4300, Service Manual

Search results

Summary of Contents for Latitude E4300

Reviews:

Related manuals for Latitude E4300

Brands by name

Popular brands