13.
Replace the hard drive (see
Replacing the Hard Drive
).
14.
Replace the bottom of the base assembly (see
Replacing the E5400 Bottom of the Base Assembly
).
15.
Follow the procedures in
After Working on Your Computer
.
Removing the E5500 Palm Rest
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Remove the bottom of the base assembly (see
Removing the E5400 Bottom of the Base Assembly
).
3.
Remove the hard drive (see
Removing the Hard Drive
).
4.
Remove the WLAN card (see
Removing a WLAN Card
).
5.
Remove the hinge cover (see
Removing the Hinge Cover
).
6.
Remove the keyboard (see
Removing the Keyboard
).
7.
Remove the display assembly (see
Removing the E5500 Display Assembly
).
8.
Remove the optical drive (see
Removing the Optical Drive
).
9.
Remove the nine M2.5 x 8-mm screws from the bottom of the computer.
10.
Remove the two M2.5 x 5-mm screws on the top of the computer securing the metal plate.
11.
Remove the three M2 x 3-mm screws that secure the top of the computer near the display.
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTE:
The screw locations may vary slightly on your computer.
1 M2.5 x 8-mm screws (9)
Summary of Contents for E5400 - Latitude - Core 2 Duo 2.4 GHz
Page 30: ......
Page 44: ...Back to Contents Page ...
Page 52: ...Back to Contents Page ...
Page 56: ...13 Follow the procedures in After Working on Your Computer Back to Contents Page ...
