Dell E5400 - Latitude - Core 2 Duo 2.4 GHz Service Manual Download Page 27

Page: 27 / 73

Remove the display inverter (see

Removing the E5500 Display Inverter

Remove the eight M2 x 3-mm screws (four on each side of the display panel) from the display hinge panels.

Lift the display panel from the top cover.

Replacing the E5500 Display Panel

Replace the eight M2 x 3-mm screws (four on each side of the display panel) to secure the display panel to the display hinge panels.

Replace the display inverter (see

Replacing the E5500 Display Inverter

Replace the display bezel (see

Replacing the E5500 Display Bezel

Replace the display assembly (see

Replacing the E5500 Display Assembly

Replace the keyboard (see

Replacing the Keyboard

Replace the hinge cover (see

Replacing the Hinge Cover

Close the display and turn the computer over.

Replace the bottom of the base assembly (see

Replacing the E5500 Bottom of the Base Assembly

Follow the procedures in

After Working on Your Computer

E5500 Display Cable

Removing the E5500 Display Cable

Follow the instructions in

Before Working on Your Computer

Remove the hinge cover (see

Removing the Hinge Cover

Remove the keyboard (see

Removing the Keyboard

Remove the display assembly (see

Removing the E5500 Display Assembly

1 M2 x 3-mm screws (8) (on display hinge panels) 2 display panel

3 top cover

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTE:

This procedure assumes that you have completed the removal procedure first.

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

Summary of Contents for E5400 - Latitude - Core 2 Duo 2.4 GHz










































































Search results

Summary of Contents for E5400 - Latitude - Core 2 Duo 2.4 GHz

Reviews:

Related manuals for E5400 - Latitude - Core 2 Duo 2.4 GHz

Brands by name

Popular brands

Dell E5400 - Latitude - Core 2 Duo 2.4 GHz, Service Manual

Search results

Summary of Contents for E5400 - Latitude - Core 2 Duo 2.4 GHz

Reviews:

Related manuals for E5400 - Latitude - Core 2 Duo 2.4 GHz

Brands by name

Popular brands