6.
Connect the antenna cables to the appropriate optional WLAN, WPAN cards that came with your computer.
7.
Replace the keyboard (see
Replacing the Keyboard
).
8.
Replace the hinge cover (see
Replacing the Hinge Cover
).
9.
Close the display and turn the computer over.
10.
Replace the bottom of the base assembly (see
Replacing the E5400 Bottom of the Base Assembly
).
11.
Follow the procedures in
After Working on Your Computer
.
E5400 Display Bezel
Removing the E5400 Display Bezel
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Remove the hinge cover (see
Removing the Hinge Cover
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the display assembly (see
Removing the E5400 Display Assembly
).
5.
Starting at the middle bottom of the display panel, use your fingers to separate the bezel from the top cover, then lift the inside edges to separate the
remainder of the bezel.
1 antenna cables
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1 display bezel
NOTICE:
Removal of the bezel from the top cover requires extreme care to avoid damage to the bezel.
Summary of Contents for E5400 - Latitude - Core 2 Duo 2.4 GHz
Page 30: ......
Page 44: ...Back to Contents Page ...
Page 52: ...Back to Contents Page ...
Page 56: ...13 Follow the procedures in After Working on Your Computer Back to Contents Page ...
